Drysuit

DX-300X

The DX-300X is the newest addition to the Hollis exposure line. Designed by technical divers, for technical divers and developed over three years in a variety of demanding conditions. It is maneuverable and comfortable while ensuring long wearing durability.

dx-300X-dry-suit-hollis


NEOTEK 8/7/6

Enjoy the warmth of our new Neotek 8/7/6 cold water hooded semidry. Constructed from a compression resistant 8/7/6 mm neoprene and a Hollis exclusive “ThermaSkin” inner liner. Includes a front neckdam with revolutionary G-Lock horizontal front zipper for easy on/off and a tight barrier against water intrusion. Arms and legs are also sealed against leaks with an internal dam. All seams are double glued and butt joined with a blind stich construction which is all covered by a unique liquid seam. Fitted with generous pockets on both the left and right thigh and comes in 9 different sizes.

neotek-876-drysuit-hollis


AUG 260

AUG260 is a dedicated thermal drysuit undergarment, that can be worn as a stand-alone undergarment, or combined with either the AUG Base or even the AUG450, depending on water temperature and type of drysuit used.

The material has the same super high wicking properties as all AUG undergarments, drawing moisture away from the skin to the outside, keeping you warm and dry throughout the dive.

Fully machine washable, and the wicking properties won’t be degraded by the washing cycle

Made from a 260 gm combination of soft touch plush brushed polyester fleece and spandex for the utmost comfort, AUG260 traps air within the plush fiber. It maintaining a protective warm air layer between the diver and the outside environment. AUG260 has super stretch which allows 4-way flexibility while still retaining its original warmth and strength. AUG260 comes in a range of unisex sizes, and is sold as a separate top and bottom, allowing mix and match of sizes if required.

aug-260-drysuit-hollis


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving Drysuit across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net

Bags

DUFFEL BAG

Made from a durable tarpaulin material, the Hollis Duffel is an excellent gear bag. Resistant to abrasion and puncture and provides storage for extended dive trips.

  • D-zip main compartment with internal zippered pocket
  • ID pocket on top
  • Backpack shoulder straps
  • Carry handles on both ends
  • Straps with padded handle
  • Rugged construction
  • Capacity: 95 Liters
  • Dimensions: 28″ x 16″ x 14″

duffel-bag-hollis


MESH DUFFEL BAG

Made from laminated nylon mesh, the Hollis Mesh Duffel is a great way to air out your wet equipment while keeping everything secure.

  • D-zip main compartment
  • Shoulder carry strap included
  • Carry straps with padded handle
  • Rugged construction

mesh-duffel-bag-hollis


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving Bags across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net

Fins

F1 – “BAT FIN” YELLOW TIP

Power without compromise. The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving. Now shipping with a yellow tip for high visibility.

F1-bat-fin-yellow-tip-fins-hollis


F1 LT

Short blade for easier finning in confined spaces and more buoyant than our original F1.

  • Lightweight SEBS compound
  • Short blade for easier finning in confined spaces
  • Angled strap mounts for comfort & a better transition of power
  • Spring heel straps with easy-grip heel tab
  • Multiple strap mounting positions for a fine tuned fit
  • Vented blade reduces stress while accelerating water over blade
  • Generous foot pocket

fl-lt-fins-hollis


F1 – “BAT FIN”

The F1 Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving.

  • High grade, heavy duty rubber construction
  • Angled strap mounts for comfort and a better transition of power
  • Spring heel straps with easy-grip heel tab
  • Multiple strap mounting positions for a fine tuned fit
  • Vented blade to reduce stress while accelerating water over the blade
  • Generous foot pocket

f1-bat-fins-hollis


F2

Increase your power to weight ratio with our new F2 fins. If you are a traveling diver, looking to reduce weight or just favor a lightweight fin, look no further. The patented F2 is designed to add blade surface on both the downstroke and upstroke to increase your efficiency with any type of kick. The F2 is injection molded using monoprene and uses a shorter blade design which packs easy and improves agility in tight areas. Standard with adjustable stainless steel spring straps.

f2-fins-hollis


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving Fins across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net

Masks

MOD-1

Used by United States Marines Combat Divers around the world, Professional Underwater Videography Teams and Scientific Dive Teams, the Kirby Morgan Modular Full-Face Mask represents a giant step-up in safety, versatility and convenience over conventional Full-Face Masks (FFMs).

Known simply as the “MOD-1”, the patented Kirby Morgan two-chamber (Mask & POD) design opens up multiple configuration possibilities with both Open Circuit and Closed Circuit Rebreather systems never before available. Hollis is excited to partner with Kirby Morgan Dive Systems, Inc, the designer of commercial and military diving systems, to bring our divers a product, the MOD-1 with optional Hollis BOV Pod or Scuba Pod, expanding the possibilities in diving safety, reliability and versatility.

mod1-mask-hollis


M3

Visibility is the most important aspect of any dive. The new M3 mask provides that with distortion free vision and superior fit. This low profile design uses a rigid frame and two lenses with an extra clear glass which is valued for its attractive appearance and optical qualities. The low iron content produces a higher light transmittance and a reduced green tint inherent in other glasses. This makes the lens distortion free and helps improve color and visibility in low light conditions underwater.

m3-maks-hollis


M1

Visibility is the most important aspect of any dive. The M1 mask raises the bar for optical quality and distortion free vision. This lens is an extra clear glass which is valued for its attractive appearance and optical qualities. The low iron content produces a higher light transmittance and a reduced green tint inherent in other glasses. This makes the lens distortion free and helps improve color and visibility in low light conditions underwater.

m1-maks-hollis


M4

When choosing a mask, fit and field of vision come first. The M4 gives you the best of both worlds, fitting a wide variety of faces and offering superior peripheral and vertical vision. It is low profile, stows easy and carries an excellent value.

m4-maks-hollis


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving Masks across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net

Scuba Diving Regulators

200LX DCX

The 200LX + DCX Regulator is our flagship regulator; designed for extreme environments. Every feature and detail of this new product provides you with the confidence of 40 years of manufacturing life support systems. The 200LX can be converted from a right-handed to left-handed hose configuration, in a manner of minutes without the use of specialty tools or calibration. The valve and every other metal component of the 200LX is “PVD” Industrial Plated, added to outperform and outlast any other regulator finish.

All LX regulators come standard with Lifetime Warranty, 2 Year Service Interval and Free Parts for Life

200_lx_black_family_diving_regulator

 


500SE DC7

Old School. New Tech. The new 500SE utilizes a servo controlled valve to provide precision airflow and unparalleled performance for both air and trimix divers in a side exhaust configuration. To achieve this, we have perfected the original “lever-servo valve” we designed 35 years ago. Overbalanced diaphragm first stage also provides ideal hose routing for both backmount and sidemount users and optimum performance regardless of depth.

500SE-DC7-regulator

 


150LX DC7 DECO

An additional regulator being added to the Hollis Regulator line is the 150LX, similar in design to the 200LX but without the PVD Plating. The 150LX delivers great performance at a moderate price. This second stage is paired with the DC7 for a great travel the world design or for those divers looking for a regulator to provide performance during long deco stops. The 150LX is paired with the DC7 as the perfect balance decompression regulator or with the HO2 1st Stage for an oxygen regulator that will never stop performing. Both styles are built for oxygen percentage 40% to 100%. The Front metal ring, packing nut & end cap in Stainless Steel. All LX regulators come standard with MiFlex® hoses and orthodontic mouthpieces with dual color tabs. It comes standard in DIN configuration. The LX regulators come standard with Hollis’s Lifetime Warranty, 2-Year Service Interval and Free Parts for Life150LX-DC7-DECO-regulator-hollis


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving Regulators across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net

Scuba Diving BCD

ENVIRO-PRO

The Enviro-Pro is the first BC designed and developed specifically for Public Safety Divers and contaminated water situations. The jacket can be customized to meet your team’s mission criteria with a unique a molle strap system that allows you to customize the position of included pockets (weight or utility) to your preference. Tested in jet fuel, gasoline, diesel and MEK without delamination or fabric separation. This product is approved for use by NOAA Divers.

enviro-pro-bcd-hollis

 


HD-200

Comfort, function and durability. The HD-200 is everything the advanced sport diver could ask for. Fitted with a combination of Tech/Rec features and updates for 2013 that provide ultimate comfort and function. Heavy duty construction and innovative design make this BC the best in class.

hd-200-bcd-hollis

 


L.T.S. LIGHT TRAVEL SYSTEM

The L.T.S. Light Travel System is our latest warm water solution for traveling divers and destinations where weight restrictions are limited. Incorporating key features from our popular HD200, the LTS is a weight integrated back inflation design with 30 lbs (13.6 kg) of lift, suitable for single AL80’s and steel 85’s. Its simple, non-modular design stows easy and weighs only 5 lbs.

lts-light-travel-system-bcd-hollis

 


C60 LX

The new LX wing range, developed and tested by technical divers and 3 years in the making. Quality and performance are the two most integral features of our products, which is why we have reintroduced the proven S series and C series wings with key improvements. New materials include a 1680D Cordura for the exterior bladder and 420 nylon for the internal bladder. The LX design also includes a 360 degree internal retraction system. This has been added to match the design of the wing, allowing for a streamlined rig at all times. We have also added a new oval corrugated hose, redesigned OPV and stainless grommets to replace the mesh on the bottom of the wing. Every new LX wing includes a lifetime warranty.

c60-lx-bcd-hollis

 


After sale service – AMIT Scuba Diving Workshop
Where to buy –       Visit our branch to buy Hollis Diving BCD across UAE.
Have any question –  Drop your queries below or email to contact@amitdubai.net